Microsoft
Software
Hardware
Network
Question : Problem: HP Laserjet 5000n having problems choosing correct tray
We have an HP Laserjet 5000n which is about 6 years old.
Running Macs on OSX, printing through network.
Suddenly started having a problem with tray selection for A3.
Tray 1 is for manual, envelopes etc
Tray 2 is A4
Tray 3 is A3
When sending a print from, it seems, any program the printer processes the job and then says "TRAY 1 LOAD PLAIN A3"
If you load A3 into the manual tray, it prints fine. If you try and select another tray such as tray 3, which is the correct one, it prints it on A3 from tray 3 but wrongly scaled and positioned too low on the page. It then says "41.3 UNEXPECTED PAPER SIZE"
If you hit 'GO' at this point, it prints it again but still incorrectly!
I have removed both trays and air dusted the whole thing.
I have restarted it.
I have reset all the settings and memory.
I have removed it at the Mac end, re-added it after installing the latest OSX driver and still the same.
Any advice greatly appreciated.
Answer : Problem: HP Laserjet 5000n having problems choosing correct tray
Lifted the top section off of tray3 and air dusted the data connections. Put it back on and we're working again!
Random Solutions
Problem: deleted files
Problem: NAS storage device for back up
Problem: Cisco 2610 And Cisco 2509 Help
Problem: Blackberry not updating read items
Problem: ghost client is not in the console
Problem: how to copy itunes songs from ipod nano back to pc
Problem: Cannot get WSUS to see computers
Problem: Using Ramdisk for .temp & .tmp files
Problem: Lenovo ThinkPad T60p: How to enable UltraNav after Ghosting?
Problem: Network drive not visible in My Computer