Microsoft
Software
Hardware
Network
Question : Problem: "No signal" error message on Acer AL1912 TFT monitor
I moved my Sony desktop computer and my Acer AL 1912 TFT monitor into a different room.
Now when I turn on the computer with the monitor switched on - instead of the monitor booting up, an error message comes up saying "No signal". The green (on) light switches to orange (standby).
I have tried checking the connections, using compressed air to clean them. I have turned off and plugged out the computer and the monitor. I even bought a new cable to see if that was the problem. Nothing works. Every time I reboot the computer this happens.
Please help!
all the best
SunnySideUp
Answer : Problem: "No signal" error message on Acer AL1912 TFT monitor
Check that there is only one video card plug at the back of the PC. There may one amongst the other connections - near USB network etc, and one further away on its own. If there are two, try the other one.
Chris B
Random Solutions
Problem: More USB Hard Drive Trouble - Unable To Write?
Problem: PC won't start - Fan's don't spin
Problem: General TAPI error in Hyper Terminal
Problem: USB Cassette Player
Problem: converting netgear router to wireless bridge
Problem: pentium 2 motherboard
Problem: Need help with encryption/decryption of DES TightVNC passwords with C#
Problem: Desktop monitor image rotated while laptop image is normal
Problem: putty connect to ubuntu
Problem: Config works but will not pass any traffic. I cannot ping even the inside interface of the vpn tunnel or the client ip