Microsoft
Software
Hardware
Network
Question : Problem: how to reformat 520 byte/sector to 512 byte/sector
I have a bunch of Hitachi 147GB Fibre Channel FC-AL drives that came out of a Network Appliance DS14. These drives had NetApp firmware formatted to 520 bytes/sector (instead of the common 512). Windows XP's device manager recognizes the drives but Disk Management is unable to find them. these drives are connected together in a JMR Fortra 4-bay JBOD connected by copper fiber to a QLA2200 and running in a Windows XP box.
Code Snippet:
1:
Open in New Window
Select All
Answer : Problem: how to reformat 520 byte/sector to 512 byte/sector
i think you should check Hitachi first for a solution
Random Solutions
Problem: dell dimension 4700, fan running high speed, front amber light steady, no video, no diagnostic lights in rear, cleared cmos, removed,installed memory, checked wires, connectors, ??? any suggestions
Problem: USING WINXP CANNOT RECEIVE FAX MESSAGES
Problem: Gateway PC will not find Hard Drive
Problem: I have an iphone exchange sync error. Recently we went off a exchange hosting plan to a new 2k3 server onsite. My co workers with active sync on there windows mobile are working fine. the server sits
Problem: Medion onitor will not come on at startup--Video Card or Monitor--not sure???
Problem: ghost transfer hard drives
Problem: HD no longer detected by BIOS, drive making "clicking" sounds
Problem: Fiber Cable vs Cat 5 or 6 Cable
Problem: DVD 4x versus 8x
Problem: No Human Interface Devices