Question : Problem: Driver failed to load for the NIC after Intel Proset 13.3 install

I am at wits end and desperate....

I uninstalled Proset 13.1 on my server 2008 (x64) and rebooted.  Then installed Proset 13.3 on the server.  Upon completion, device manager shows that the OS cannot load the drivers for both ports of the NIC with a code 31.

I rebooted the server and now I cannot access the properties page of the NIC on device manager.  When accessed, the device manager will just hang.  Attempts to uninstall the Proset failed as well, with the process stayed at Preparing to install.....  etc.

Please help!

Answer : Problem: Driver failed to load for the NIC after Intel Proset 13.3 install

Well...  This is too critical so I had to restore the backup image of last known good config, uninstalled Proset from the restored machine in DSRM.  Then reboot and reinstall Proset 13.3.  This time, it took 1 hour and complained about Install Server was down (whatever that means).  when I clicked ok, the install continued and everything worked!

Go figure.....
Random Solutions  
 
programming4us programming4us