Question : Problem: Creating a snapmirror from FilerA to FilerB error 1/3 of the way through.

I'm new at NetApps (today is my 1st day) and I'm trying to resolve an issue and don't even know where to start looking.  I have FilerA that hosts data and filerB that will host Snapmirrors (for a DR scenario).  When transferring a 1.2TB snap from my 3040 to my 2020, I get the following error (at around 400G)

Snapmirror error: transfer from source not possible; snapmirror may be misconfigured, the source volume may be busy or unavailable

Both filers are on the same LAN, both filers are up.  I imagine I need to check FilerA, but not sure where to go or what to look for.  I hate to sound so vague, but any help would be greatly appreciated.

Answer : Problem: Creating a snapmirror from FilerA to FilerB error 1/3 of the way through.


They exist on both filers, accessible through filerview (snapmirror section). Both may contain different info.

Random Solutions  
  •  Problem: Blackberry 7130e, Enterprise Activation Question
  •  Problem: Can I install a Intel Core-Duo 2 45nm on a P5LD2 Rev 2.0(intel 945p chipset)?
  •  Problem: Possible to /span (remote dual screen) desktops within Remote Web Workplace?
  •  Problem: HP JetDirect 175x and HP cp1700 on NT server sp6, some Pc print some only spool (then stop responding)
  •  Problem: Bios Error Beep Code for Intel D865GBFLK / Intel P4 3.0 CPU 2x512MB  PC3200 DDR400
  •  Problem: Can I use the Mac Built In Cam on WinXP/Fusion?
  •  Problem: cant print to directly attached hp laserjet 1012
  •  Problem: Laptop backlight question...
  •  Problem: a disk read error has occured press control alt delete to restart ((already installed new HDD, fresh copy of XP, I have even tried flashing the bios))   STUMPED
  •  Problem: My dell vostro 200 Desktop won't boot up...just beeps
  •  
    programming4us programming4us