Microsoft
Software
Hardware
Network
Question : Problem: cisco 2948g console port
I am trying to connect to a cisco 2948g that I purchased used. It seems to work as a switch but I was trying to connect to the console to possibly set it back to default settings and then set an ip address to it.
I can't seem to get the console working. I have tried to computers using hyperterminal. Settings were set to 9600, 8, none, 1, none
i get nothing when trying to connect. nothing while the switch por's .
Answer : Problem: cisco 2948g console port
Also if you are using a console cable and only a blank screen comes up try hitting ENTER a couple times. Sometimes with Hyperterminal the router prompt doesnt show at first
Random Solutions
Problem: Configure a GHO file
Problem: Is it safe to use reformatted MFT corrupted harddisk?
Problem: Old Compaq computer NVidia Vanta on board vid card will not change resolution
Problem: Software to test true speed between two offices
Problem: Sudden loss of wireless internet connection
Problem: WTF's up with my iSCSI network config ???
Problem: HP 3015 WIA Driver
Problem: Compare Trendnet and Netgrear network switches
Problem: Dell Latitude D620 low speaker volume
Problem: Resetting th ink status on printer after refilling