Question : Problem: Need USB 2 for Intel SE7501BR2 Server Motherboard w/Dual Xeon 2.4GHz CPUs

I have a server motherboard that has only USB 1 but I'd like to add USB 2 Support for increased file transfer speed to external hard drives. The Mother Board is Intel SE7501BR2 Server Motherboard. The description is system description:

 Dual Intel Xeon 2.4 GHz processors
 1 GB DDR RAM (8 GB maximum)
 Three (3) 36 GB SCSI hard drives for a total of 108 GB
 One (1) 40 GB IDE hard drive
 16x DVD-ROM drive
 52 x 32 x 52 CD-RW drive
 Floppy drive
 Integrated ATI Rage XL Graphics
 PCI 56K modem
 Adaptec SCSI controller card
 Intel PRO Network Connections: one (1) 10/100 82550PM Fast Ethernet controller and one (1) 10/100/1000
82540EM Gigabit Ethernet controller
 Motherboard Features:
 Intel Server Board SE7501BR2
 Intel E7501 chipset
 Dual memory channel architecture
 Four (4) PCI-X 64-bit/100 MHz slots
 Two (2) PCI 32-bit/33 MHz slots
 Four (4) 184-pin DDR sockets Registered ECC DDR266 memory
 Rear Panel Ports:
 Two (2) PS/2 ports
 Two (2) 9-pin Serial ports
 One (1) 15-pin VGA port
 One (1) 25-pin Parallel port
 One (1) 10/100 Ethernet jack
 One (1) 1 GB Ethernet jack
 Line in/phone modem jacks
 Four (4) SCSI conn
 Case Features:
 Two (2) 5.25-inch external drive bays
 One (1) 3.5-inch external drive bays
 Six (6) 3.5-inch internal drive bays

I'm using Windows Home Server Software.

The specific question is: Can I get USB 2 support on this configuration and if so what specifically do I need to purchase so that compatible drivers can be found?


Answer : Problem: Need USB 2 for Intel SE7501BR2 Server Motherboard w/Dual Xeon 2.4GHz CPUs

Odd, all seems fairly standard.  Maybe try pulling down the latest drivers. Does the card get detected?
Random Solutions  
 
programming4us programming4us