Microsoft
Software
Hardware
Network
Question : Problem: Printers dropping off after one or two print jobs
I have the two HP printers listed. I'll start up the workstation and print to either one of the HP printers, sometimes a couple of jobs. Inevitably, and pretty quickly, you cannot print to them anymore. The job appears to go out and sits in the queue and does nothing. A workstation reboot or stopping and restarting the spooler service clears this up for a short time, but it then repeats. No entries in the event log. Any help greatly appreciated.
Answer : Problem: Printers dropping off after one or two print jobs
Very good. I had to do some work from home and thought I would jump in and see what was going on. I should be around tomorrow barring anything the IT gods stir up! I'll look for you tomorrow.
Random Solutions
Problem: How do I get around HP error 83.0180 EIO, stuck in calibration mode
Problem: Broadcom 4318E Driver
Problem: WinFax Lite
Problem: Ghost Restore causes Vista to clear Restore Points
Problem: Using Cisco 3560\3750 SFP port for Tape Library
Problem: svcost.exe process killing machine, hijackthis log included
Problem: motherboard
Problem: scanner does not scan
Problem: SCSI RAID controller for Supermicro P4SCT+II
Problem: Tiny FU661E scanner probs