Question : Problem: Setting up pass through

Please - I'm trying to set up a Netgear DG834 router in pass through mode on a DSL connection so that I can use a Netgear FVS338 router to host a VPN.  I'm not sure how to configure the 834 to operate in pass through mode - do I use port forwarding?

Thanks.

Answer : Problem: Setting up pass through

Copy and paste the link below into your browser, changing the IP address to that of the DG834.
192.168.0.1/setup.cgi?next_file=mode.htm

This will allow you to change the DG834 into a modem only and let the FVS338 handle the internet authentication, routing and VPN connections.
Random Solutions  
  •  Problem: Dell AIO 962 Can't Scan when attached to network
    •
  •  Problem: Clients can connect to database on VPN through wired ethernet but not through wireless
    •
  •  Problem: MegaPath Partial T-1
    •
  •  Problem: My R40 thinkpad wouldn't start and I can hear a clicking sound when I try to turn it on.
    •
  •  Problem: IDE / SATA RAID - Which is faster / better onboard or PCI expansion card?
    •
  •  Problem: Promise FastTrak SX4100 - Loss of all data on RAID 5 Drives
    •
  •  Problem: BES in for multiple exchange environments
    •
  •  Problem: How do I best organise: I want itunes library on external hard-drive but also want a subset of my music on my macbookpro but want to avoid duplication?
    •
  •  Problem: we have a ASA5505 connecting to a ASA5520. the asa5505 drop links and no traffic can pass over the vpn
    •
  •  Problem: Decent way to protect potentially embarrassing photos?
    •
     
    programming4us programming4us