Question : Problem: Need help with Cisco VPN/PIX 501 setup??

I recently bought a PIX 501 firewall for home use.  The company I work for has allowed the support staff to VPN into their network.  Of course, when I disconnect my PIX, I can VPN in fine, but of course, that is a hassle.  I want to VPN in while keeping my home LAN as secure as possible.  What commands would I need to implement on my PIX to gain VPN access to my company's network.

My Setup:
Broadband with the PIX acquiring a DHCP address from the cable company.

W2K PC w/VPN Client --- PIX501 --- Cable Modem ------ (INTERNET) ------ CO Firewall --- CO PIX or VPN Conc --- CO LAN

Currently have only a few ports open for gaming.
One more question.  Does the PDM VPN Wizard help out with this.  I don't prefer to use wizards but will if it will work.
Any assistance would be greatly appreciated.  Thank you.

Answer : Problem: Need help with Cisco VPN/PIX 501 setup??

I don't think the wizard will help.
Are you using Microsoft PPTP VPN ?
  Yes - add the following:
     fixup protocol pptp 1723

 No, using Cisco IPSEC VPN client, add the following:
    isakmp nat-traversal 20