Microsoft
Software
Hardware
Network
Question : Problem: WAP54G / WRT54G as wired adapter
I have a couple of WAP54g's and a WRT54G not in use anymore. I have a computer out in my shop that I need a wireless adapter on.
I am wondering if I can use one of these units and the cat connection on the back of the Linksys to just cable to my computer instead of using a usb or pci adapter on the computer.
In other words, put one of these units in my shop to recive the wireless signal and then connect a cat5 patch cable from the unit to my computer nic card.
Using AT&T U-Verse as isp with a 2wire 300HGV-B gateway.
Answer : Problem: WAP54G / WRT54G as wired adapter
Here is the link to setup client mode.
http://www.dd-wrt.com/wiki
/index.php
/Client_Mo
de_Wireles
s
Random Solutions
Problem: New DHCP server wont activate
Problem: WTF's up with my iSCSI network config ???
Problem: 20" Olevia "Out of Range"
Problem: Computer Reboots
Problem: Poor video quality despite top quality hardware
Problem: Flash BIOS for Tyan Board Can't Be Found!!! Substitution?
Problem: How can I backup my DPM 2007 server - client can not be rollout
Problem: Cannot connect to RoadRunner Cable Internet Access after loading Office 2000
Problem: How to connect two machines with a crossover cable and cat5/6
Problem: Error 1780 on IBM Server X336 - shows error on boot but no error messages in logs