Question : Problem: Cannot Install From SmartStart

I have a DL380 G3 Server which was running Windows no problem. I then upgraded the firmware and installed VMWare ESX server - no problem. I now want to re-install Windows but when I boot from the SmartStart CD it says loading and then nothing happens. I have tried the SmartStart 8.0 and 7.40. Could the ESX install have caused a problem?

Answer : Problem: Cannot Install From SmartStart

I fixed it. I had to go in the Bios and set the system for Windows 2000/2003 instead of 'other'
Random Solutions  
  •  Problem: My lap top screen is not bright enough or clear enough
  •  Problem: I have an iphone exchange sync error. Recently we went off a exchange hosting plan to a new 2k3 server onsite. My co workers with active sync on there windows mobile are working fine. the server sits
  •  Problem: Gateway PC will not find Hard Drive
  •  Problem: apple laptop not reading DVD's.
  •  Problem: dell dimension 4700, fan running high speed, front amber light steady, no video, no diagnostic lights in rear, cleared cmos, removed,installed memory, checked wires, connectors, ??? any suggestions
  •  Problem: What Motherboard is in Philips Freevents LX1000
  •  Problem: What are the ramifications of exceeding manufacturer's memory recommendations?
  •  Problem: Load balancing and Citrix
  •  Problem: Best wifi solutions for large old houses with  really thick walls
  •  Problem: VPN Tunnel between a Cisco 515 to Linksys RV042
  •  
    programming4us programming4us