Microsoft
Software
Hardware
Network
Question : Problem: Issue with Cisco 1242 boot image
Hi
I have a cisco AP (1242) with a corupt flash image.... I have tried to find a new image to TFTP to the AP (as its dead). When I use the following file I get this error.....
Base ethernet MAC Address: 00:19:e8:6f:7f:08
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button is pressed, wait for button to be released...
button pressed for 28 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image t
ftp://255.255.255.255/c12
40-k9w7
-tar.default
examining image...t
ftp://255.255.255
.255/c1240
-k9w7-tar.
default
: no such file or
directory
ERROR: Failed to open archive file t
ftp://255.255.255.255/c12
40-k9w7-ta
r.default
The system is unable to boot automatically because there
are no bootable files to boot.
I believe it is because the file contains no boot image, is there a place I can download one from? Im using the c1240-k9w7-mx.123-11.JA4 file.
Help!!!
Answer : Problem: Issue with Cisco 1242 boot image
Can I use xmodem to send a new image across?
Random Solutions
Problem: UPS power consumption
Problem: I need to recover data from a My Book World Edition
Problem: GA-5AX + WD800JB 80GB Hard Drive = ????
Problem: Retrieve Back Data After Formatting Hardisk
Problem: Backup Exec 10d cannot select mapped drive
Problem: Can't boot pc with Silicon Image SATA card
Problem: 1 PC with 3 Monitors using Cat5 VGA Video Splitter 2-Channel the display disappears
Problem: Move active directory printers to new DC
Problem: Error message on screen "out of range"
Problem: Supported memory modules on 945 chipset mainboards?