Microsoft
Software
Hardware
Network
Question : Problem: HP Scanjet 5300c Drivers
Hi
I use an HP Scanjet 5300c, which works fine. I have been using VBA to operate the scanner semi-automatically, using the 2.5 version of the drivers and scanjet utilities, but I have had to upgrade these to work correctly with Windows XP SP2. The 'old' Scan utlitiy had a tick box that could be set during first use to remember many of the settings, thus avoiding the need to change these if the scanner were used in a particular way each time. The 'new' Scan utility does not have such a tick box and requires the imaging settings to be reset each time. I can't find a way of overriding this - does anyone know how I can do so?
Regards
Answer : Problem: HP Scanjet 5300c Drivers
There's been no response to this question for some time. Can it be closed, please?
Random Solutions
Problem: Dual-View using VNC over VPN
Problem: Scanjet 4400c in Linux
Problem: Need help with Cisco VPN/PIX 501 setup??
Problem: Trace Dynamic IP using Internet data card provided by ISP
Problem: MP3s/computer from hell??
Problem: Computer Reboots on shutdown when serial device plugged into COM port
Problem: Using Cisco 3560\3750 SFP port for Tape Library
Problem: Which Ghost can take image on RAID/SATA/SCSI disk?
Problem: PAPER PICK-UP ERROR
Problem: HP 3380- Jet Direct Print Card-Scanning over network