Question : Problem: configure RAID 5 for Supermicro server

I create the RAID but it shows uninitialized and when I run windows 2008 server install, it doesn't see the drives.

I guess the RAID is not initialized.

Answer : Problem: configure RAID 5 for Supermicro server

Were the drives preformatted to ntfs? if not that probably is your problem.
Try Paragon partition manager, it should help you figure out what is going on.

http://www.paragon-software.com/downloads/demo.html

Random Solutions

Problem: how to fix bios problem

Problem: Drives boot on primary controller but not in RAID

Problem: Sysprep vs Config File - Domain join not working with Config File

Problem: used wrong program to open file

Problem: How to configure firewall - DHCP, Proxy, etc

Problem: Capture Card not working with new Media Center Edition?!

Problem: CiscoWorks - Unable to telnet / ssh into devices from Topology Services

Problem: Unmounable Boot Volume - Got data off after chkdsk, now need to get it to be bootable again

Problem: Single Quad Xeon vs. two Dual Core Xeons

Problem: Windows update SP 3 failed on my iMac boot camp partition! How do I fix this?