Microsoft
Software
Hardware
Network
Question : Problem: T-298 LED display jumper setup ?
Hi,
I am trying to set this T-298 led display to show 2.50 and can`t find instructions anywhere as how to proceed. It has two sets of jumper rows. The upper level can handle 10 jumpers; the lower, 11. Any help would be highly appreciated.
Second, i think the voltage used by a standard power led is 5 volts as i intend to connect the led display to a modern motherboard`s power led`s connector. Can you confirm this being right and safe? T-298 Pics enclosed. Thanks!
Answer : Problem: T-298 LED display jumper setup ?
PCBONEZ:
Great, thanks again for your help. Settling for this (picture)
P1090205.JPG
(133 KB)
(File Type Details)
Compromise
Random Solutions
Problem: SCCM 2007 Agent Check for Health
Problem: How To Deliver PC OUTPUT to 2-3 Monitors/TV's =
Problem: Cold Temperature large cheap hard drivers
Problem: Blackberry Storm centralized deleting
Problem: Video Card Benchmarking & Finding a Fit
Problem: how do i remove trial software from new Computer
Problem: Need 2 LANs to look like 'one' network
Problem: Veritas 9.1 Question - Tape Device
Problem: iPhone to IMAP will not connect unless username == exchange alias
Problem: sharepoint agent for bacup exec 12 will it work on backup exec 11d ?