|
|
|
Question : Problem: WTF's up with my iSCSI network config ???
|
|
Experts:
I just purchased an EMC AX4-5i dual-SP SAN appliance; two racks, one for SAS drives and the other with SATA drives. I'm just setting up the appliance and I'm stuck, hoping you all can help me figure something out.
If you look at the attached file you'll notice my vanilla setup: 1 server with 3 NICs connected to a pair of GigE switches configured in a meshed network connecting a pair of SP units, each with two iSCSI ports of their own.
The problem I'm having is that on the server i can only ping one of two switches and only two of four iSCSI ports
C:\Program Files\Support Tools>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : galapagos
Primary Dns Suffix . . . . . . . : xxx.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : xxx.local
Ethernet adapter 192.168.253.98:
Connection-specific DNS Suffix . : xxx.local
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Adapter
Physical Address. . . . . . . . . : 00-04-23-AB-6A-0B
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.253.98
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter 192.168.253.99:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Adapter #2
Physical Address. . . . . . . . . : 00-04-23-AB-6A-0C
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.253.99
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter 192.168.10.25:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC3163 Fast Ethernet NIC
Physical Address. . . . . . . . . : 00-50-8B-EB-15-1C
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.10.25
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.10.1
DNS Servers . . . . . . . . . . . : 192.168.10.13
192.168.10.25
Primary WINS Server . . . . . . . : 192.168.10.13
Secondary WINS Server . . . . . . : 192.168.10.25
C:\Program Files\Support Tools>ping 192.168.253.199
Pinging 192.168.253.199 with 32 bytes of data:
Reply from 192.168.253.199: bytes=32 time=3ms TTL=64
Reply from 192.168.253.199: bytes=32 time=2ms TTL=64
Reply from 192.168.253.199: bytes=32 time=1ms TTL=64
Reply from 192.168.253.199: bytes=32 time=2ms TTL=64
Ping statistics for 192.168.253.199:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 3ms, Average = 2ms
C:\Program Files\Support Tools>ping 192.168.253.198
Pinging 192.168.253.198 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.253.198:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Program Files\Support Tools>ping 192.168.253.200
Pinging 192.168.253.200 with 32 bytes of data:
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.253.200:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Program Files\Support Tools>ping 192.168.253.201
Pinging 192.168.253.201 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.253.201:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Program Files\Support Tools>ping 192.168.253.202
Pinging 192.168.253.202 with 32 bytes of data:
Reply from 192.168.253.202: bytes=32 time=1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.253.202:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
C:\Program Files\Support Tools>ping 192.168.253.203
Pinging 192.168.253.203 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.253.203:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Program Files\Support Tools>
So before I go any further and start configuring iSCSI initiators or LUNs, etc...I wanted to clear up this networking mystery
Thanks,
juckyt
|
Answer : Problem: WTF's up with my iSCSI network config ???
|
|
Items necessary for good network documentation
1. Identification of servers, workstations, printers, routers, switches, etc.
a. IP addresses
b. NetBIOS/Host names
c. MAC addresses
2. Description of each device on the network, including make, model, serial number, and printouts from system inventory software (such as Belarc Advisor)
3. Network topology diagrams, including placement of servers, routers, switches, firewalls, IDS, etc.
a. Physical and logical diagrams
b. Layer 3 networking diagrams, including backbone and WAN links
4. Internet provider information
a. Description of link(s)
b. Contacts and support numbers
c. Terms of service
5. List of supported network operating systems (Win2K Server, NT4, NetWare 5, Linux, etc.)
6. List of supported client operating systems (Win2K Pro, Win98, MacOS, Linux, etc.)
7. List of supported network protocols (TCP/IP, IPX/SPX, AppleTalk, NetBEUI, etc.)
8. DHCP server settings, including scopes and options
9. Network security settings
a. Firewall configuration (including TCP and UDP ports open)
b. Router access lists
10. Troubleshooting history/administrator's activity log
a. Common problems and resolutions
b. Installation history
11. Network baseline information
a. Traffic flow and network utilization
b. Bandwidth utilization
c. Percent of collisions
d. Average server and workstation CPU utilization
e. Average server and workstation memory utilization
12. Fault tolerance mechanisms in place
a. Disk redundancy (e.g., RAID arrays)
b. Tape backup plan, including rotation and off-site storage
c. Clustering and failover systems
13. Physical location documentation
a. Building map
b. Room numbers
c. Availability of access keys
d. Unusual configuration information
14. Policies and procedures
a. Naming conventions
i. Workstations and servers (NetBIOS and host names)
ii. Network equipment (e.g., routers and switches)
iii. Active Directory
iv. DNS
b. Points of contacts (IT director, administrators, help desk, etc.)
c. Disaster recovery plan
i. Vendor phone numbers for support
ii. Remote access plan for administrators
iii. Higher-up administrator or consultant on call
iv. Virus prevention/recovery plan
d. Copies of maintenance plans, warranty agreements, and tech support contacts
e. Software licensing information
f. User rights policies, including Internet and e-mail usage
|
|
|
|
|
