Microsoft
Software
Hardware
Network
Question : Problem: SLI Problems
hello all. I recently had problems with my SLI. I have 2 nVidia GeForce 8600 GTS. My POST gave me the blank screen with the blinking cursor at the top left of the screen until I removed my 2nd vcard. Everything works fine now, but I want SLI back without the whole POST problems with the screen. How am I to go about doing this? Update the BIOS? Also, when my computer boots up and goes into BIOS, my first video card displays all of this but when I get to the welcome screen, my screen goes blank and I have to switch my display adapter to the other video card to view my desktop. How do I fix this so everything is shown using one video card, but connected as SLI?
Any ideas would help. Thanks
Answer : Problem: SLI Problems
Make sure your power supply is enough to handle an SLI setup and that you have connected the two cards with an SLI bridge. Here's a guide to putting together an SLI system:
http://www.slizone.com/obj
ect/slizon
e_howtobui
ld_1.html
Random Solutions
Problem: Array microphone incompatible with sound card?
Problem: HOW DO I RECOVER ALL THE DATA ON THE ABOVE DRIVE,WHICH IS NOW RESPONDING "UNREADABLE"?
Problem: How to remove duplicate "Legacy Audio Drivers" and etc. ?
Problem: Dual IP addresses on one NIC.
Problem: When formatting an NFTS drive, what does selecting different block(cluster) size do?
Problem: Installing new disks in Dell poweredge 2900 servers
Problem: Matrox TripleHead2Go doesn't work after reboot
Problem: How to Ghost an HP DL380 with RAID5
Problem: Yellow haze on Sony digital camera through view finder and on LCD; does not affect photos taken.
Problem: Com port stops working when computer shuts Down.