Question : Problem: CISCO DIALUP ROUTER CONFIGURATION HELP!!!!!!!!!!!!!!!!!!!!

I have a dialup router that I am configuring and the configuration that I ma using is not working for some reason.

T1 Line through fiber and media converter going to my site
      |
Media Converter
      |
CISCO 3745 Router with a PRI 1CT1-CSU card ( once I configured the controller it created a Serial 1/0:23 on my configuration) The interface is also Controller T1 1/0 and Serieal device 1/0:23  its a copper connection comming from the media converter. I configured this interface with IP UNNUMBERED to use the IP from FA0/0
      |
      |
 From FA0/0 on the DIALUP Router it connects to the:
      |
External Router FA1/0

Below is the complet config and i am not sure of the rest if i did it correctly. Can you please assist me:

show run
Building configuration...

Current configuration : 3819 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname EACH-DIAL
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5
!
username  privilege 15 password 7
no network-clock-participate aim 0
no network-clock-participate aim 1
aaa new-model
!
!
aaa authentication login default group tacacs+ local
 --More--                           aaa authentication login consoleport none
aaa authentication ppp default group tacacs+
aaa authorization exec default group tacacs+
aaa authorization network default group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa session-id common
no ip subnet-zero
ip cef
!
!
!
!
no ftp-server write-enable
isdn switch-type primary-5ess
!
password encryption aes
!
!
controller T1 1/0
 framing esf
 linecode b8zs
 pri-group timeslots 1-24
 --More--                            description DIALUP Controller
!
!
interface FastEthernet0/0
 description Dialup Managment Interface
 ip address 200.200.59.66 255.255.255.192
 no ip mroute-cache
 speed auto
 half-duplex
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial1/0:23
 ip unnumbered FastEthernet0/0
 autodetect encapsulation ppp v120 lapb-ta
 isdn switch-type primary-5ess
 serial restart-delay 0
!
interface Group-Async1
 --More--                            physical-layer async
 ip unnumbered FastEthernet0/0
 encapsulation ppp
 no ip mroute-cache
 async mode interactive
 peer default ip address pool async1
 ppp authentication chap
!
interface Group-Async2
 physical-layer async
 ip unnumbered FastEthernet0/0
 encapsulation ppp
 no ip mroute-cache
 async mode interactive
 peer default ip address pool async1
 ppp authentication chap
!
ip default-gateway 200.200.59.65
ip classless
no ip http server
ip http authentication local
!
!
 --More--                           !
!
tftp-server 200.200.105.104
tacacs-server host 200.200.108.8
tacacs-server directed-request
tacacs-server key 7
!
control-plane
!

!
line con 0
line aux 0
line vty 0 4
 privilege level 15
 password 7
 transport input telnet
line vty 5 15
 privilege level 15
 transport input telnet
 --More--                           !
end

EACH-DIAL#show controler        
EACH-DIAL#show controllers 7   t1 1/0
T1 1/0 is down.
  Applique type is Channelized T1
  Cablelength is long gain36 0db
  Description: DIALUP Controller
  Transmitter is sending remote alarm.
  Receiver has loss of signal.
  alarm-trigger is not set
  Framing is ESF, Line Code is B8ZS, Clock Source is Line.
  Data in current interval (466 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 466 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 466 Unavail Secs
  Data in Interval 1:
     0 Line Code Violations, 0 Path Code Violations
     1 Slip Secs, 900 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 900 Unavail Secs
  Total Data (last 1 15 minute intervals):
     0 Line Code Violations, 0 Path Code Violations,
     1 Slip Secs, 900 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 900 Unavail Secs
EACH-DIAL#    show int s1/0:23
Serial1/0:23 is reset, line protocol is down
  Hardware is DSX1
  Interface is unnumbered. Using address of FastEthernet0/0 (200.200.59.66)
  MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation HDLC, loopback not set
  Restart-Delay is 0 secs
  Last input never, output never, output hang never
  Last clearing of "show interface" counters 00:08:19
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations  0/0/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 48 kilobits/sec
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 output buffer failures, 0 output buffers swapped out
 --More--                                0 carrier transitions
  Timeslot(s) Used:24, Transmitter delay is 0 flags
EACH-DIAL#show int fa 0/0
FastEthernet0/0 is up, line protocol is up
  Hardware is Gt96k FE, address is 000e.832f.1040 (bia 000e.832f.1040)
  Description: Dialup Managment Interface
  Internet address is 200.200.59.66/26
  MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Half-duplex, 100Mb/s, 100BaseTX/FX
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:25, output 00:00:07, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     103 packets input, 6180 bytes
     Received 103 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog
     0 input packets with dribble condition detected
     169 packets output, 16983 bytes, 0 underruns
 --More--                                0 output errors, 0 collisions, 3 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out
EACH-DIAL#ping 200.200.59.65

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 200.200.59.65, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms

Answer : Problem: CISCO DIALUP ROUTER CONFIGURATION HELP!!!!!!!!!!!!!!!!!!!!

It doesn't show any terminal lines, which would make it look to me like you don't have any modems installed in that box. You can double-check that by issuing the "show modem version" command and seeing if it responds with any modem information. To get it to work as a dialup server you need to have something like a NM-24DM modem card installed in it.  

1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
4 Serial network interface(s)
>----> 192 terminal line(s)<----<
8 Channelized T1/PRI port(s)
128K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)