Question : Problem: I succesfully installed a second slave HD and have a question

hi, I just installed a secondary slave maxtor 120GB 7200 for extra space.
I formatted it through Disk Management and noticed some differences to my primary 40GB HD.

The primary has the following status:
Layout:  Partition  Type:  Basic  File System:  FAT32

while the secondary is:
Layout: SImple  Type: Dynamic  File System:  NTFS

What/why do both status differ and should I worry about this at all?
I'm new to this and a bit worried if this is right,  thanks~

Answer : Problem: I succesfully installed a second slave HD and have a question

If you want to know the differences between Basic and Dynamic check this one => http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnntpro00/html/management.asp

So, to be short, if you'r running only win2k or winXP there is nothing to worry about, but you might want to convert your first partition to NTFS also. To do this: Start => Run => type "convert c: /FS:NTFS" without the quotes (you will be asked if you want to perform the conversion the next time you boot, choose yes)

LucF