Question : Problem: Motherboard Settings for reset, hdd led, power led & power switch.

Have installed a used motherboard and can't find a technical manual that shows settings.
Motherboard Model:hp systems board d9840-60007
Motherboard ID 03/16/2001-8605686a-6a6llfo9c-00
Mother Name: HP Brio BA410
Bios : Award Version 10.07.09
Chipset: VIA Apollo Pro 133z/pm133
NEED MANUAL SHOW HOW TO HOOK UP THESE POWER LEADS

Answer : Problem: Motherboard Settings for reset, hdd led, power led & power switch.

The white is normally refered to as the negitive wire and the color one is the positive one, and black is norminaly the ground wire.
On the LED wires the Colored one is the + and the White is the -
On the Speaker the Red is the + and the Black is the -
On the Power and Reset connectors polarity does not matter so you can connect these any way you want.

(Tip: Plug in the Speaker wire an notice which side the lettering is on, then plug in all the other wires with the lettering in the same direction)