|
|
Question : Problem: HP Print Commands
|
|
I'm running an application that will automatically print a document. I would like to send printer commands with the document. To be exact, I would like to send a STAPLE command to an HP LaserJet 4350 dtn. I would like to know how to send the command and what the command is. Thanks
|
Answer : Problem: HP Print Commands
|
|
In the documentation for this printer and optional stapler it indicates 3 methods to select the Staple Option. "1. When you are ready to have the printer staple a document, select stpling in the software. You can usually select the stapler in your program or 2. printer driver, although some options might be available only in the printer driver. Where and how you make selections depends on your program or printer driver. 3. If you cannot select the stapler in the program or printer driver, select the stapler at the printer control panel.
You might need to configure the printer driver to recognize the optional stapler/stacker. You need to set this setting only once. See the printer driver online Help for Details."
Manual: http://support.nami.org/support/files/4250man.pdf
This might provide some ideas: http://h71000.www7.hp.com/doc/82final/dcps_mg/dcpsnnn_mguide_003.html
Another Link as possible idea: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=bpl12926&jumpid=reg_R1002_USEN
Hope this Helps!!!
|
|
|