Microsoft
Software
Hardware
Network
Question : Problem: Voice Controller Card change
Dear All,
We have the attached configuration in our cisco 7206 router to facilitate voice calls. VXC-2TE1+ port has been inserted in Slot 1.
Now from one port s1/0 the outgoing calls are not going out but incoming calls are coming through with out any issue. As per the telecom technicians advice we need to change the card in slot 1. we are already procured a temp card for testing.
Now can i just insert the same card just like that ? after insertion do i need to configure everything which was there with the old card or it will be taken from the old card?
Once the testing is over i need to revert back the old card.kindly guide me to test the new card and revert back the old card after testing .
What are the neccessary steps i should follow to carry out the task.
Any response will be highly appreciated.
Thanks
Shibu
Answer : Problem: Voice Controller Card change
No, the 7206 does not support online insertion (OIR) and removal, it must be powered down first.
harbor235 ;}
Random Solutions
Problem: Need to create an ISL between McData Sphereon 4700 and EMC Connectrix DS 200B
Problem: HP iPAQ H4150 - Sync the PDA with Outlook
Problem: Dell Inspiron Power
Problem: Console Mode doesn't work is someone isn't logged into console
Problem: Ipod Touch POP Mail Setup Problems
Problem: Canon C5180 Color Printing Dropping Printer
Problem: GeForce 7900 GT HD (component) to HDTV not working, no display on TV. Ideas?
Problem: Laptop or Portable Dumb Terminal?
Problem: what is the step to build a sever ?
Problem: Bonding/MUXing 8 T1's from same provider