Microsoft
Software
Hardware
Network
Question : Problem: Cisco Aironet Signal Strength Between AP's
I have 2 cisco aironet Access points setup and i want to see the signal between the 2. I know nothing is available via gui to do this but i was told there was in cli to monitor signal or RSSI.
Answer : Problem: Cisco Aironet Signal Strength Between AP's
The correct command is
sh dot11 associations
(rich text mistype, sorry)
Random Solutions
Problem: SBS 2003 NT backup failing when writing to Dell Powervault 100T DAT 72
Problem: BATTERY NOT CHARGING ON LAPTOP
Problem: Networking with Homeplug vs Wi-Fi
Problem: Project Windows Mobile display onto a workstation.
Problem: Compaq Presario R3400 DVD/CD-RW replacement drive needed
Problem: "Single-Bit ECC Errors in Memory Bank"
Problem: Ghost a hardware raid 5 on smart array 532 controller
Problem: QuickTime file possibly corrupted - help much appreciated
Problem: I want to somehow bring my laptop to factory condition on boot as windows fails to load
Problem: Remove/Disable RIP on a Cisco 1710 router.