Question : Problem: VTP- VLAN

I have 30 switch (2950, 2960G,3750) and backbone 4600 series. I wish to create VLAN through VTP what will be the best design and what will be the command I will use to accomplish this configuration. keep in mind some switch did not accept (#vtp mode client) it only have (#vtp file) and how can I make inter connection between the established vlans also with other on the remote network

Thanks

Answer : Problem: VTP- VLAN

1. Client switches have to be in vtp mode client no matter what. "vtp file" command will just rename VTP database file. I think you need to enter VLAN configuration mode first and then enter "vtp client" command.

2. VLAN is L2 network, so if you can create a L2 bridge to your remote network it shouldn't be a problem. If it's point to point connection, most likely it's not an option and you will need to deal with L3 IP networks.