Question : Problem: Can only access Bios in setup mode

I had to replace my motherboard. At startup, there was no post and I couldn't access CMOS by pressing F2, etc. So I reset the jumper to access the bios setup. It shows my Cpu, Ram, HDs, etc, but when I set the jumper back to normal, again, no post and I cannot access Bios. I have tried 2 different video cards, and have a new 450w power supply. Thank you for any help you can provide.

Answer : Problem: Can only access Bios in setup mode

seems dead, like suggested before DOA

Random Solutions

Problem: Persistent Travan/Backup Exec 11d I/O errors

Problem: How can I stop my touchpad-as-mouse from clicking on its own?

Problem: Socket 478 And Pci Express

Problem: Scanners with Remote Desktop

Problem: Watch HDTV using Hardware Acceleration

Problem: Connect New Desktop PC with Monitor - Problems

Problem: Using Cisco 3560\3750 SFP port for Tape Library

Problem: Recover Data/Repair damaged hard drive with over tension?

Problem: Mac Mini won't boot and CD-ROM makes non stop ejecting sounds.

Problem: Speakers do not work and keyboard ony half works after formatting hard drive