Question : Problem: Using Cisco 3560\3750 SFP port for Tape Library

I am going to be setting up a tape library. I am told with the library that I'm getting that there are two ways to set it up,

[svrs to be backed up]----->thru the lan---->[backup svr]--->SCSI--->[tape library]

or

[fiber nic]------>[fiber bridge]------>[tape library]

My question is, can I use a cisco switch (3560\3750) and plug the tape library in one of the spf ports on it?

I want to buy the switch to act as the 'fiber bridge' and since it's a gb switch and all the servers have gb nics, i just want them to have a gb connection to the tape library which itself is connected by fiber.

Also, in buying the switch, it says the SFP ports are empty, do I need to purchase a specific gbic or fiber module to plug into the spf port? And i'm assuming this module will depend what type of fiber connection is coming off the tape library, would that be correct? like SC to LC or someting another

Answer : Problem: Using Cisco 3560\3750 SFP port for Tape Library

download the Remote Desktop Client (If you are not using it) already from microsoft.   http://www.microsoft.com/windowsxp/downloads/tools/rdclientdl.mspx

This will allow you to connect to the terminal Server.  After you have installed the above, open it up and configure the remote desktop client to logon to the server.  (CLick the Options tab to see all the options)  after you are done setting it up click save as.. and save it to a location where the user can access it.

Now the user just has to double click the Remote Desktop FIle you created and it will automatically connect to the terminal server with no user input.