Question : Problem: How to delete Scan to FTP destination entries on the Bizhub pro C500

I have setup a new location for our Konica Minolta BizHub Pro C500 to scan to using it's Scan to FTP feature.  It works just fine, and scans the document there saving as a PDF.  The problem I have is that in attempting to set this up and setup multiple destinations for the device to scan to that don't work and now I cannot figure out how to delete those locations.  When you set them up you can add them as an entry, which is what I've done.  I now have six entries and need to delete all but two (the two that work).  I have read through the manual, and cannot figure it out.  Please, please help!  Your assistance is greatly appreciated.

-Jacob

Answer : Problem: How to delete Scan to FTP destination entries on the Bizhub pro C500

Sorry, forgot which model we were talking about ( I work on Develop machines which are badged K-M)


1.press copy mode button
2.press help button
3. Touch " key operator mode"
4. If password is set, enter it, or just press "ok"
5.Touch the down arrow, then touch 18 "scan tranmission setting"
6. touch the destination to change or delete
7. touch "change" or "delete"
8. Touch OK to exit
"