|
|
Question : Problem: T1 Controller to Serial Interface, please help
|
|
Hello Everyone
On one end I have a Cisco Router 3700 Series with a T1 Controller (VWIC-2MFT-T1)
On the other end I have a Cisco 1721 with a WIC1-DSU-T1
Is it possible to configure these in a point to point T1 configuration? If so, how do i go about configuring it,
|
Answer : Problem: T1 Controller to Serial Interface, please help
|
|
On the 3700, if you haven't already, you need to add a channel group under the controller config to create the serial interface.
Example:
controller T1 0/0 framing esf clock source internal linecode b8zs channel-group 0 timeslots 1-24 speed 64 This will create interface Serial0/0:0 which you can then configure as you did the 1721.
|
|
|
|