Question : Problem: WTF's up with my iSCSI network config ???

Experts:

I just purchased an EMC AX4-5i dual-SP SAN appliance; two racks, one for SAS drives and the other with SATA drives. I'm just setting up the appliance and I'm stuck, hoping you all can help me figure something out.

If you look at the attached file you'll notice my vanilla setup: 1 server with 3 NICs connected to a pair of GigE switches configured in a meshed network connecting a pair of SP units, each with two iSCSI ports of their own.

The problem I'm having is that on the server i can only ping one of two switches and only two of four iSCSI ports

C:\Program Files\Support Tools>ipconfig /all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : galapagos
   Primary Dns Suffix  . . . . . . . : xxx.local
   Node Type . . . . . . . . . . . . : Unknown
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : Yes
   DNS Suffix Search List. . . . . . : xxx.local


Ethernet adapter 192.168.253.98:

   Connection-specific DNS Suffix  . : xxx.local
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Adapter
   Physical Address. . . . . . . . . : 00-04-23-AB-6A-0B
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.253.98
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :

Ethernet adapter 192.168.253.99:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Adapter #2
   Physical Address. . . . . . . . . : 00-04-23-AB-6A-0C
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.253.99
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :

Ethernet adapter 192.168.10.25:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : HP NC3163 Fast Ethernet NIC
   Physical Address. . . . . . . . . : 00-50-8B-EB-15-1C
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.10.25
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.10.1
   DNS Servers . . . . . . . . . . . : 192.168.10.13
                                       192.168.10.25
   Primary WINS Server . . . . . . . : 192.168.10.13
   Secondary WINS Server . . . . . . : 192.168.10.25

C:\Program Files\Support Tools>ping 192.168.253.199

Pinging 192.168.253.199 with 32 bytes of data:

Reply from 192.168.253.199: bytes=32 time=3ms TTL=64
Reply from 192.168.253.199: bytes=32 time=2ms TTL=64
Reply from 192.168.253.199: bytes=32 time=1ms TTL=64
Reply from 192.168.253.199: bytes=32 time=2ms TTL=64

Ping statistics for 192.168.253.199:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 1ms, Maximum = 3ms, Average = 2ms

C:\Program Files\Support Tools>ping 192.168.253.198

Pinging 192.168.253.198 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.253.198:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Program Files\Support Tools>ping 192.168.253.200

Pinging 192.168.253.200 with 32 bytes of data:

Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64

Ping statistics for 192.168.253.200:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:\Program Files\Support Tools>ping 192.168.253.201

Pinging 192.168.253.201 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.253.201:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Program Files\Support Tools>ping 192.168.253.202

Pinging 192.168.253.202 with 32 bytes of data:

Reply from 192.168.253.202: bytes=32 time=1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64

Ping statistics for 192.168.253.202:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 1ms, Average = 0ms

C:\Program Files\Support Tools>ping 192.168.253.203

Pinging 192.168.253.203 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.253.203:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Program Files\Support Tools>

So before I go any further and start configuring iSCSI initiators or LUNs, etc...I wanted to clear up this networking mystery


Thanks,
juckyt

Answer : Problem: WTF's up with my iSCSI network config ???

Hi,

I have had the same problem with posting Postfix problems. However, I may have some help for you...

You may find the following information of use to you:

Typical support for a virtual domain looks like the following:

virtual.domain mapped to... anything (right-hand content does not matter)
[email protected] mapped to... address1
[email protected] mapped to... address2, address3

 
With this, the SMTP server accepts mail for virtual.domain and rejects mail for [email protected] as undeliverable.
The format of the virtual table is as follows, mappings being tried in the order as listed here:

user@domain mapped to... address, address, ...: Mail for user@domain is redirected to address. This form has the highest precedence.

user mapped to... address, address, ...: Mail for user@site is redirected to address when site is equal to $myorigin when site is listed in $mydestination, or when it is listed in $inet_interfaces. This functionality overlaps with functionality of the local alias database. The difference is that virtual mapping can be applied to non-local addresses.

@domain mapped to... address, address, ...: Mail for any user in domain is redirected to address. This form has the lowest precedence.

 
In all the above forms, when address has the form @otherdomain, the result is the same user in otherdomain. This works for the first address in the expansion only.

HTH,
Random Solutions  
 
programming4us programming4us