Question : Problem: WTF's up with my iSCSI network config ???

Experts:

I just purchased an EMC AX4-5i dual-SP SAN appliance; two racks, one for SAS drives and the other with SATA drives. I'm just setting up the appliance and I'm stuck, hoping you all can help me figure something out.

If you look at the attached file you'll notice my vanilla setup: 1 server with 3 NICs connected to a pair of GigE switches configured in a meshed network connecting a pair of SP units, each with two iSCSI ports of their own.

The problem I'm having is that on the server i can only ping one of two switches and only two of four iSCSI ports

C:\Program Files\Support Tools>ipconfig /all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : galapagos
   Primary Dns Suffix  . . . . . . . : xxx.local
   Node Type . . . . . . . . . . . . : Unknown
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : Yes
   DNS Suffix Search List. . . . . . : xxx.local


Ethernet adapter 192.168.253.98:

   Connection-specific DNS Suffix  . : xxx.local
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Adapter
   Physical Address. . . . . . . . . : 00-04-23-AB-6A-0B
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.253.98
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :

Ethernet adapter 192.168.253.99:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Adapter #2
   Physical Address. . . . . . . . . : 00-04-23-AB-6A-0C
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.253.99
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :

Ethernet adapter 192.168.10.25:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : HP NC3163 Fast Ethernet NIC
   Physical Address. . . . . . . . . : 00-50-8B-EB-15-1C
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.10.25
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.10.1
   DNS Servers . . . . . . . . . . . : 192.168.10.13
                                       192.168.10.25
   Primary WINS Server . . . . . . . : 192.168.10.13
   Secondary WINS Server . . . . . . : 192.168.10.25

C:\Program Files\Support Tools>ping 192.168.253.199

Pinging 192.168.253.199 with 32 bytes of data:

Reply from 192.168.253.199: bytes=32 time=3ms TTL=64
Reply from 192.168.253.199: bytes=32 time=2ms TTL=64
Reply from 192.168.253.199: bytes=32 time=1ms TTL=64
Reply from 192.168.253.199: bytes=32 time=2ms TTL=64

Ping statistics for 192.168.253.199:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 1ms, Maximum = 3ms, Average = 2ms

C:\Program Files\Support Tools>ping 192.168.253.198

Pinging 192.168.253.198 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.253.198:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Program Files\Support Tools>ping 192.168.253.200

Pinging 192.168.253.200 with 32 bytes of data:

Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64

Ping statistics for 192.168.253.200:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:\Program Files\Support Tools>ping 192.168.253.201

Pinging 192.168.253.201 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.253.201:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Program Files\Support Tools>ping 192.168.253.202

Pinging 192.168.253.202 with 32 bytes of data:

Reply from 192.168.253.202: bytes=32 time=1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64

Ping statistics for 192.168.253.202:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 1ms, Average = 0ms

C:\Program Files\Support Tools>ping 192.168.253.203

Pinging 192.168.253.203 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.253.203:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Program Files\Support Tools>

So before I go any further and start configuring iSCSI initiators or LUNs, etc...I wanted to clear up this networking mystery


Thanks,
juckyt

Answer : Problem: WTF's up with my iSCSI network config ???

Seem like i'm doing someone homework ;-). So be it, there we go.

Computer naming schema:
A -> 486/66 MHZ Processor, 200 MB Hard drive, 16 MB RAM
B -> 486/233 MHZ Processor, 500 MB Hard Drive, 32 MB RAM
C -> Pentium 233 MHZ Processor, 2.5 GB hard drive, 64 MB RAM
D -> Pentium II 533 MHZ processor, 16 hard drive, 128 MB RAM
Note: 486 computer never had 233 mhz processor, the fastest was 486dx4-100mhz (i think).

1. Check if all computer have network card, if not, buy some (10/100 are more that enought). (4*10$)

2. Then you buy a hub (30$, worst security ever, but cheaper that a switch or a router) and connet all computer (with cat5/rj45 cable) to it. It will create a star network topology.

3. I would then install windows on each computer (normaly i would say linux on all, and use xwindows server on the strongest computer, but you ask for >easy< solution). And assign static IP adresse as follow:
A-> 192.168.0.1 / 255.255.255.0 (ip/netmask)
B-> 192.168.0.2 / 255.255.255.0
C-> 192.168.0.3 / 255.255.255.0
D-> 192.168.0.4 / 255.255.255.0

4. Then I would take the computer (D) and share one part of his drive that would be use as a repository for the file that people are going to need (inventory). Since most of the computer would'nt support windows 2k kernel, you'll need to be sure to format computer d hard-drive with fat32 (not ntfs).

5. The 3 others computer would be client (windows + access to the server (computer d) share).

6. If you want (security might not be important, but data might) you can also create a share on computer C and schedule automatic task (in windows of computer D) to copy all "important data" to computer C. It would be your "backup database".
 
Note 2: with this plan, you would have client computer, connect to a "smili-server" which can also be use at the same time as client. You would have some problem to install windows on the 486, so you might think to update the computer all together. Another way to do it, would, as i said, to install linux on all computer since it work without the need of big computer and create a similar network topology. You could also use the computer D as a xwindwos server (not only as a file server) which would even more reduce the load on the smaller computer.

There you go, hope it's what you had in mind.