|
|
|
Question : Problem: WTF's up with my iSCSI network config ???
|
|
Experts:
I just purchased an EMC AX4-5i dual-SP SAN appliance; two racks, one for SAS drives and the other with SATA drives. I'm just setting up the appliance and I'm stuck, hoping you all can help me figure something out.
If you look at the attached file you'll notice my vanilla setup: 1 server with 3 NICs connected to a pair of GigE switches configured in a meshed network connecting a pair of SP units, each with two iSCSI ports of their own.
The problem I'm having is that on the server i can only ping one of two switches and only two of four iSCSI ports
C:\Program Files\Support Tools>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : galapagos
Primary Dns Suffix . . . . . . . : xxx.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : xxx.local
Ethernet adapter 192.168.253.98:
Connection-specific DNS Suffix . : xxx.local
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Adapter
Physical Address. . . . . . . . . : 00-04-23-AB-6A-0B
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.253.98
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter 192.168.253.99:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Adapter #2
Physical Address. . . . . . . . . : 00-04-23-AB-6A-0C
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.253.99
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter 192.168.10.25:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC3163 Fast Ethernet NIC
Physical Address. . . . . . . . . : 00-50-8B-EB-15-1C
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.10.25
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.10.1
DNS Servers . . . . . . . . . . . : 192.168.10.13
192.168.10.25
Primary WINS Server . . . . . . . : 192.168.10.13
Secondary WINS Server . . . . . . : 192.168.10.25
C:\Program Files\Support Tools>ping 192.168.253.199
Pinging 192.168.253.199 with 32 bytes of data:
Reply from 192.168.253.199: bytes=32 time=3ms TTL=64
Reply from 192.168.253.199: bytes=32 time=2ms TTL=64
Reply from 192.168.253.199: bytes=32 time=1ms TTL=64
Reply from 192.168.253.199: bytes=32 time=2ms TTL=64
Ping statistics for 192.168.253.199:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 3ms, Average = 2ms
C:\Program Files\Support Tools>ping 192.168.253.198
Pinging 192.168.253.198 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.253.198:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Program Files\Support Tools>ping 192.168.253.200
Pinging 192.168.253.200 with 32 bytes of data:
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Reply from 192.168.253.200: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.253.200:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Program Files\Support Tools>ping 192.168.253.201
Pinging 192.168.253.201 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.253.201:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Program Files\Support Tools>ping 192.168.253.202
Pinging 192.168.253.202 with 32 bytes of data:
Reply from 192.168.253.202: bytes=32 time=1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64
Reply from 192.168.253.202: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.253.202:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
C:\Program Files\Support Tools>ping 192.168.253.203
Pinging 192.168.253.203 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.253.203:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Program Files\Support Tools>
So before I go any further and start configuring iSCSI initiators or LUNs, etc...I wanted to clear up this networking mystery
Thanks,
juckyt
|
Answer : Problem: WTF's up with my iSCSI network config ???
|
|
Exporting to Excel is not too difficult. I created a table (tblStacked) with 3 fields - X1, X2, and Value. In theory, X1 is the column number, X2 is the segment number, and Value is the value of the segment. For what it's worth, I did not go through the exercise of building the stacked column chart; I just built a simple column chart in the last bit of code. But this will show you how to export your data and use it to build a chart; you'll need to work through the Excel code of building the stacked colimn chart.
Private Sub cmdExport_Click()
Dim xlApp As Excel.Application
Dim strSQl As String
Dim rst As Recordset
Dim db As Database
Dim iRow As Integer
'Get data from table or query
strSQl = "Select X1,X2,Value from tblStacked"
Set db = CurrentDb()
Set rst = db.OpenRecordset(strSQl)
'Create Excel workbook and load data
Set xlApp = Excel.Application
xlApp.Workbooks.Add
With xlApp
.ActiveSheet.Range("A1").Value = "X1"
.ActiveSheet.Range("B1").Value = "X2"
.ActiveSheet.Range("C1").Value = "Value"
iRow = 2
rst.MoveFirst
While Not rst.EOF
With .ActiveSheet
.Range("A" & iRow).Value = rst("X1")
.Range("B" & iRow).Value = rst("X2")
.Range("C" & iRow).Value = rst("Value")
End With
iRow = iRow + 1
rst.MoveNext
Wend
iRow = iRow - 1
.ActiveSheet.UsedRange.Select
.Charts.Add
With .ActiveChart
.ChartType = xlColumnStacked
.SetSourceData Source:=Sheets("Sheet1").Range("C1:C" & iRow), PlotBy:= _
xlColumns
.SeriesCollection(1).XValues = "=Sheet1!R2C1:R" & iRow & "C1"
.Location Where:=xlLocationAsObject, Name:="Sheet1"
End With
.ActiveWorkbook.SaveAs "c:\temp\testbook.xls"
End With
'xlApp.Visible = True
xlApp.Quit
Set xlApp = Nothing
Set rst = Nothing
Set db = Nothing
End Sub
-ef
|
|
|
|
|
