Microsoft
Software
Hardware
Network
Question : Problem: Updating a stand alone cisco 3500xl firmware
Hi lads
I'm a complete beginner when it comes to cisco switchs
I have a cisco 3500xl switch which is not connected to any network.
I want to update the firmware before I configure the switch for use in our network.
How can i setup a TFTP server to be able to pull the new ios from.
I have tried a static ip address, TFTP software, enabled the ethernet port, but i feel i am missing somthing.
Any how would be cool
Answer : Problem: Updating a stand alone cisco 3500xl firmware
Ok I solved it
When configuring vlan 1 to connect to the pc, i needed to enter "arp arpa" after setting the ip address.
Cheers for the help lads
Random Solutions
Problem: How to set up single external hard drive to work in MAC and PC?
Problem: Lost CD for A+ Fifth Edition by Charles J. Brooks
Problem: Cisco 7206 Card Usage for DS1 Access
Problem: Virus clean up
Problem: Connecting 3com switch to existing network
Problem: Replace 256mb ECC 2100 RAM with 1GB ECC 3200 or 1GB ECC registered 2100
Problem: Troubleshooting a performance issue: new SATA drives only getting 7MB/s write
Problem: Can you configure WINS to work over a Site to Site VPN Tunnel?
Problem: Hard drive back up
Problem: Hewlett Packard and Terminal Services