Question : Problem: EVGA nForce 650i ultra mobo questions

I am building my first system using the EVGA nForce 650i Ultra board and have a few questions:

1. Does this mobo have a chasis intrusion detector plug? My case has it but I can't find a connector on the mobo.

2. My case has AC-97 audio and the mobo has HD audio. Can I just match up the pins and get the front audio jacks to work?

3. My case had 2 front USB 2.0 ports that each have a 4-pin connector, but the USB 2.0 headers on the board are set up for 10-pin connectors. Can I use the case's 4-pin connectors on the mobo? If so, can I put both on 1 header so I can use the other header for a multi-card reader or does each 4-pin USB have to plug into a seperate connector on the mobo?

4. There is nothing in the 605i manual about a speaker connector but I think I found one on the corner of the board nearest the last PCI expansion slot on the end. Anyone know if that is correct?

Any help would be appreciated.  Thanks in advance.

Brian

Answer : Problem: EVGA nForce 650i ultra mobo questions

1. No, the mobo has no such function as chasis detection.
2. Yes you can, as long as you match the pins correct.
3. You can put both 4 headers into same USB port on motheboard.
4. Your mobo has no speaker.