|
|
Question : Problem: Slave drive not recognized
|
|
I am trying to salve a Maxtor 60 GB Drive to a Dell computer.
here are the facts :
Dell Computer Runs XP....on the IDE cable there is space for a slave. The primary master on the Dell is a Maxtor 40 GB...when I plug in the slave (Maxtor 60 GB) it is not recognized by BIOS. All the jumpers are set accord to manufactuer diagram on each drive...any ideas?
|
Answer : Problem: Slave drive not recognized
|
|
Some things to try: - connect it as master on the secondary IDE - try a different cable - try the new drive in another machine
Does your Dell BIOS recognize drives larger than 40GB? Try a smaller drive in the same slave position. If it's a matter of drive size, you may need a BIOS update for your motherboard, or a PCI IDE card like this: http://www.newegg.com/app/ViewProductDesc.asp?description=16-102-027&depa=1
|
|
|