Question : Problem: Using Cisco 3560\3750 SFP port for Tape Library

I am going to be setting up a tape library. I am told with the library that I'm getting that there are two ways to set it up,

[svrs to be backed up]----->thru the lan---->[backup svr]--->SCSI--->[tape library]

or

[fiber nic]------>[fiber bridge]------>[tape library]

My question is, can I use a cisco switch (3560\3750) and plug the tape library in one of the spf ports on it?

I want to buy the switch to act as the 'fiber bridge' and since it's a gb switch and all the servers have gb nics, i just want them to have a gb connection to the tape library which itself is connected by fiber.

Also, in buying the switch, it says the SFP ports are empty, do I need to purchase a specific gbic or fiber module to plug into the spf port? And i'm assuming this module will depend what type of fiber connection is coming off the tape library, would that be correct? like SC to LC or someting another

Answer : Problem: Using Cisco 3560\3750 SFP port for Tape Library

Also, if the clients are coming from the same location, you might want to use an ACL on your firewall to restrict the IP addresses that can come in on the RDP port.  Regardless, definately put the terminal server into a network segment away from your critical data.  If there are applications on the TS that need the data, you can selectively allow traffic between the application server and the backend database/file/whatever server in the protected area of your network.
Random Solutions  
 
programming4us programming4us