Microsoft
Software
Hardware
Network
Question : Problem: Front audio port does not work
I built a competer using a Biostar TA7800 series board. The front panel has a HD audio connection. The rear (motherboard) ports work fine but the front panel port will not work. There must be some BIOS or OS setting I am missing. All the HD drivers are installed and work correctely. The MOBO used the Realtech HD driver. I appreciate any help I can get.
Thanks, David
Answer : Problem: Front audio port does not work
you should use the AC97 plug; then look in the bios for the audio setting, ansd set it to AC97
Random Solutions
Problem: Best large tape drive --> Magazine fed?
Problem: Connect to a VPn with a script
Problem: Applet to Prevent VPN Timeouts
Problem: What does it mean when finding the following error in the event log? : Unable to create the symbolic link for \Device\Serial1
Problem: WTF's up with my iSCSI network config ???
Problem: Can't get my ScanPrisa 640p scanner to work with windows xp
Problem: Unable to boot GA-P35-DS3P in RAID mode with Windows XP
Problem: Processor Upgrade for Compaq Presario 5020
Problem: Using Cisco 3560\3750 SFP port for Tape Library
Problem: VPN Tunnel is connected, but traffic ignores it...