Microsoft
Software
Hardware
Network
Question : Problem: Reading a RAID 1 Disk
I have a server with a defective controller. I need to read one of the drives on another server. How can I do that?
I have a server with a RAID controller.
Answer : Problem: Reading a RAID 1 Disk
I solved the problem by disabling RAID support. The controller was then able to see the corrupted disk. I was able to repair it and then re-install it on the original server.
Thank you.
Random Solutions
Problem: routing based on specific ip addresses
Problem: Color prining works fine from IE 6 but failsto print colors properly from Word 2000 or Word 2003
Problem: How can I get Parallels to stop install the parallels tools everytime I use the bootcamp partition?
Problem: IBM Thinkbad ball error
Problem: Using Cisco 3560\3750 SFP port for Tape Library
Problem: Connecting Monitor To Grpahics Card
Problem: Bad inverter or ccfl?
Problem: Canon Canoscan FB 330P Twian Error in WinXP / PhotoShop6.0
Problem: WTF's up with my iSCSI network config ???
Problem: How can I get rid of or disable an unwanted hot-key problem?