Microsoft
Software
Hardware
Network
Question : Problem: Will an ATX FF MB Fit into a Case designed for MicroATX FF
I want to know if the following motherboard (P5KPL/1600 - ATX Form Factor
12 inch x 9 inch ( 30.5 cm x 22.9 cm )) will fit into the enclosure (Antec NSK1480 MicroATX Form Factor (9.6" x 9.6"))
Answer : Problem: Will an ATX FF MB Fit into a Case designed for MicroATX FF
No, the PSU takes up the space where the bottom of the elongated ATX board would have to fit in.
Random Solutions
Problem: I need a graphics card for an old ASUS A7V133. Best choice?
Problem: Cannot start pc
Problem: Two NIC Cards in PowerEdge 2600
Problem: new device doesn't show up in windows; how to format the disk
Problem: Dual-Homed (Multihomed) - Two NICs to two different ISPs, both NICs have internal IP addresses and different DNS servers. RRAS installed.
Problem: Bare Metal Restore on Server or SBS 2003
Problem: I have a Phenom II X3 710 and 4GB of 1066 RAM. The third core on the cpu doesn't show and the ram won't run stable @ 1066. How do I fix this?
Problem: I have a new PX502 library with an LTO3 drive and any new media gets labeled as cleaning media.
Problem: 4GB of memory only shows up as 3.25GB in SBS2003
Problem: Adaptec SCSI Adapter