Question : Problem: Remove front cover from Dell Optiplex GX150 tower to allow me replace on/off switch

The On/off switch has failed in the Dell Optimplex GX150 tower. I think I need to remove the front cover as the switch is behind the housing with holds the all the driver Hard disk and DVD rom and this appears to riveted into the PC frame. I have asked Dell and the Philipino lady was helpful but not knowlegeable. So I would appreciate and pointers on how to get at the on/off switch.

Answer : Problem: Remove front cover from Dell Optiplex GX150 tower to allow me replace on/off switch

Here is the document on the dell site. Open the cover as described. The power assembly is in the front.

http://support.dell.com/support/edocs/systems/opgx150/sm_en/smdsktp.htm#computer_cover

Random Solutions

Problem: SMS 2003 secondary site SMSPKGD$ share not created

Problem: How to connect CAT6 cable 4-Pairs to RJ-45 Jack Module (Faceplates)

Problem: OS wont bootfrom specific hard drive

Problem: Mouse pointer speed adjustment.

Problem: InfoPrint 1532 Error

Problem: Local and Offsite Backup Solution

Problem: Using Cisco 3560\3750 SFP port for Tape Library

Problem: unhandled exception

Problem: Flashdrive has autorun files that cannot be erased. U3 or not U3?

Problem: Gateway modem, and soundcard drivers not functioning