Microsoft
Software
Hardware
Network
Question : Problem: Tapeware - Data Recovery (Error 549)
Is there any way to recover data files off a Quantum DLT1 tape after receiving an Error Number: 549 Block Size Too Large when attempting to find the Media Name?
OS: Windows 2003 Server
Software: Tapeware (Yosemite) Ver. 7.0
Device: 3.0.5.0 DLT1
Tape: Quantum DLT1
The tape in question was created on a tape drive that has since gone bad and was replaced with a like unit.
Perhaps the tape has fallen victim to a previous defective drive.
What research Ive seen so far seem to indicate in order to make the tape usable is to format. That kind of defeats any recovery.
Any suggestions as to how archived files may be recovered with the above error is greatly appreciated.
Thanks in advance.
Answer : Problem: Tapeware - Data Recovery (Error 549)
When a drive is not able to read a tape due to incorrect block size, as you already know,the only option to use that tape would be to erase it so that a new header is written to the tape with the correct block size
Random Solutions
Problem: XP stuck in safe mode selection screen
Problem: Gateway PA2 LCD backlight refuses to light up - even after new inverter and new LCD
Problem: Taking long time to open Toshiba laptop.
Problem: ARCserve and Shutting Down SQL Database for WSUS
Problem: Modem failed to respond
Problem: Hardware/Software flow control
Problem: Set queue_depth for SAN disks
Problem: Problem with mic recodrding
Problem: Needing step by step instructions for accessing and tightening recharge port of Averatec 3200 Series Laptop
Problem: regulate sms on blackberry