Microsoft
Software
Hardware
Network
Question : Problem: Remote web workplace via 3G Dongle
I have remote web workplace setup on a server - which works fine if I connect to it from home with a wired connection.
But if I connect with from my 3G Dongle it gets as far as seeing my desktops on the server I click on my PC.
Then it brings up this error message.
"The client could not establish a connection to the remote computer. The most likely causes for this error are:
1) Remote connection might not be anabled at the remote computer.
2) The maximum number of connections might be exceeded at the rmeote computer
3) a network error might have occurred white establishing the connection
4) the remote web workplace designated port might be blocked by a firewall."
Because I am connecting with a 3g dongle does another port need opening on the router.
Answer : Problem: Remote web workplace via 3G Dongle
Seems like there was not enough bandwidth from the 3g connection to enable it to connect remotely.
Random Solutions
Problem: WTF's up with my iSCSI network config ???
Problem: Having a problem after installing HP-RDX-Installer.exe
Problem: Automatic reverse remote connection?
Problem: TV Card not detected
Problem: Video conference through LAN
Problem: Computer Ram and speed
Problem: Fault tolerance
Problem: Local Mapped Drives not available on Terminal Services
Problem: How do I configure telnet and SSH access on a cisco pix 501? Also, will I have to create a Access-list to allow telnet and SSH?
Problem: RAID 0 Desconfiguration