Question : Problem: HP Compaq dx6100ST disk error on bootup when usb printer connected

HP Compaq dx6100ST disk error on bootup it only happens when I have the Brother MFC-620CN plugged in via the usb port on the pc - I have disconnected the usb printer and it boots fine - I then tried booting up with an external usb hard drive and it booted ok any ideas ?

Answer : Problem: HP Compaq dx6100ST disk error on bootup when usb printer connected

I have solved the problem by formatting the hard drive and reinstalling the O/S from scratch and then downloading the Mobo drivers etc from HP and then installed the printer drivers then it worked fine.
It seems to have only been a problem when the system was rebuilt using the HP system recovery software.

Random Solutions

Problem: cracked laptop screen

Problem: ipod classic not recognized by itunes, what is fix?

Problem: Can I use an "S cable" to 15 pin vga connector in order to run prgs from notebbok to projector?

Problem: How to load music video DVD into IPOD???

Problem: Flash BIOS with DOS Bootable CDROM "Not enough Memory" ??

Problem: Driver failed to load for the NIC after Intel Proset 13.3 install

Problem: Laptop. What does Virtual Display means and how to enable it

Problem: Linksys Vpn RV082 that keeps going out. I had to replace it 3 times in the last 2 yrs. Any suggests on any other routers that might work. I have a 10/100 8 port .

Problem: Basic telnet commands