Microsoft
Software
Hardware
Network
Question : Problem: Sheilded (STP) versus Unsheiled (UTP) Cat 5
I need to run sheilded cable to some industrial devices as per the vendors specification but I have only ever used UTP Cat5e in my Cisco switches. Will this cable work fine in any switch or do I need to get a switch that states it can support STP cables. Are there any isues when running this tpye of cable into a standard 3900 catalyst. Cisco's web site specs out the switch with UTP and doesn't state anything baout sheilded cable
Answer : Problem: Sheilded (STP) versus Unsheiled (UTP) Cat 5
pseudocyber is correct, the cable makes no difference except if there is a loss or interference difference for the length of the run. As long as the voltage is in spec by the ends of the line, STP or UTP make no difference.
Random Solutions
Problem: silent installation
Problem: Reallocating hard drive space in Server 2003
Problem: Memtests
Problem: Can Send but not recieve from Blackberry phone using BES Server and Exchange 2203
Problem: Looking for small redundant switch
Problem: DST .Reg & .Vbs to Win2000 via SMS2003?
Problem: Aggregate Bandwidth Rate Limiting with CiR/CAR Rate Limiting
Problem: Cisco 2950 not accepting keyboard input using hyperterminal
Problem: IPOD Touch Hardware Install
Problem: Telnet VS ssh