Microsoft
Software
Hardware
Network
Question : Problem: routing based on specific ip addresses
I need to change the default route based on source ip address. I am using cisco 2610 router. Since i am going to use this for only upstream, packets leaving from router is enough. How to accompalish it. IOS version is 11.3(10)T.
Moorthy
Answer : Problem: routing based on specific ip addresses
use policy based routing with route-map
11.3 should use same commands as 12.0
http://www.cisco.com/warp/
public/105
/36.html
http://www.cisco.com/warp/
public/732
/Tech/plic
y_wp.htm
http://www.cisco.com/unive
rcd/cc/td/
doc/produc
t/software
/
ios120/12
cgcr/qos_c
/qcpart1/q
cpolicy.ht
m
Random Solutions
Problem: Audio problems.
Problem: Remote Desktop - Boot the Current User
Problem: HP All-in-one Storage Set up
Problem: HP Monitor - Input Not Supported
Problem: CD Writing or reading failing
Problem: New USB Devices No Longer Recognized
Problem: Apple Xraid, use with Ms Windows 2008 on HP server
Problem: Smaller utility for jetdirect
Problem: PIX 501 MAC Cloning
Problem: BlackBerry Server & Email Sync