Microsoft
Software
Hardware
Network
Question : Problem: Access rules and NAT to setup VNC through a Cisco 871 router
Hi,
I am setting up VNC to connect from the internet. The host computer is behind a Cisco 871 router.
I setup this NAT:
ip nat inside source static tcp
5900 interface FastEthernet4 5900
Do I also need to setup an access rule to open port 5900? Can I open that port just for 1 specific ip address or MAC address?
Thanks!
Answer : Problem: Access rules and NAT to setup VNC through a Cisco 871 router
Nope, it will only do inspection on the TCP 5900 traffic.
Random Solutions
Problem: BlackBerry 7230 Mailbox Wireless Sync Problem with Corporate Exchange 2000 Server
Problem: Hard Drive Can not repair
Problem: Message received with subject line in strikeout
Problem: Changing mother, micro and memory in an IBM Aptiva
Problem: File system written over Ext3: Recovery
Problem: Join a Ipaq to active directory domain?
Problem: Ethernet Line Protcol?
Problem: 2924 switch login problems
Problem: can I upgrade onboard flash memory from 64MB?
Problem: CELL_SERVER