Question : Problem: Quantum V4P895P3/smt v5.0 motherboard problem

I have a V4P895P3 Quantum motherboard for an AMD 486dx4 100
processor (3.3V). I haven't used it in a while, but now I
need it.
The problem is that it doesn't seem to work properly. I
think it probably is a memory configuration problem. I got
4 4MB SIM ram in the 30pin bank (the card takes both 72 and
30 pin SIM). But the screen is blank and nothing happens
really. All components, memory, harddrive and all cards
work as they are all in use.

I can't find the manual, but I know that there is only a
few certain memory configurations the motherboard can take.
And there might be a jumper I gotto set because it was last
used with 73pin SIMs.

Hope someone got this card or manual hanging around should
be easy to answer then..

I'm willig to give lots more points if someone got a working
sollution fast!

Answer : Problem: Quantum V4P895P3/smt v5.0 motherboard problem

Hi,

From what I can gather, your motherboard has 4 x 30pin and 2 x 72 pin slots?

For jumper settings for AMD dx4/100, goto:

http://www.indi.nl/indicom/td/mainb/mb.html

Your board is in the 486 boards section as VL/ISA PB486P3 (you'll have two options - rev. code 1 and above rev. code 1).  

If you click on SHOW next to it, you can choose the CPU type and this will show you what your jumper settings should be.

There shouldn't be any settings for memory, it should be automatic, especially since you haven't mixed types at all.

I hope this helps, let me know.