I have a dell 1750 server, running 2003 that is set up with 3 drives/raid 5. A drive failed. The failed drive was removed and replaced/rebuilt. After a reboot of the server, the server hangs during the boot process initializing the network service. The network information shows on the screen then drops down to a cursor on a blank line but doesn't go anywhere from there. I checked to make sure that there is activity lights on the card and the network cable is connected to the network. Since I am not able to get to any prompts, I don't have clue where else to check. What do I need to do/check to get past this step?
|
