Microsoft
Software
Hardware
Network
Question : Problem: USB Flash Drive - Appears as "not ready" - Cannot Recover Data
I have a clients Verbatim 2Gb flash drive with EXTREMELY important data on it.
When inserted into ANY machine, it shows up as "Removable Disk" assigned G:.
In Device properties it appears as:
USB Disk 30X USB Device
File System "Unknown"
Device Type "Disk Drives"
Location "on USB Mass Storage Device"
Status "No Media"
Partition Style "Master Boot Record (MBR)
When opened it gives the prompt "insert a disk into Removable Disk (G:)" as if it a CD drive.
It therefore doesn't show up on any recovery software (PC Inspector/GDB/Recuva) as it looks to the software as a drive that is 'not ready".
I have scanned the original machine for viruses, none found. I cannot scan the drive for viruses for obvious reasons. i have attempted to remove the drivers loaded for it, and re-install, no luck.
The Data on the drive is drawings for an engineering works, and is worth ALOT of money, and they are DESPERATE. I have exhausted my ideas on what i could do. Please could someone help.
Thanks in advance.
R
Answer : Problem: USB Flash Drive - Appears as "not ready" - Cannot Recover Data
Dear RichJS,
i'm sorry to tell you that but 90% the Flash Disk is Destroyed.
Regards,
Mohamed Allam
Senior Solution Developer
Random Solutions
Problem: citrix presentation server 401 error
Problem: Cisco 837 ADSL Router: Adding Routes to a LAN-to-LAN VPN tunnel
Problem: Installing Windows 2000 on a Netfinity Server w/ SCSI hotswap drives - Cannot format
Problem: Laptop cooling problem
Problem: Recovery disk for a Toshiba Satellite A215-S5818 Laptop
Problem: HP Laptop randomly boots with hw change
Problem: NO VIDEO SIGNAL!
Problem: Printer only prints the top of the document, why?
Problem: Apple, Powerbook G4, Start up issues, no lights turn on
Problem: Help Installing video card and bios settings