Question : Problem: Custome Resolution for lcd

PC configuration
ANTEC SONATA III 500
ASUS M3A78-EH
AMD X2 5600+
4GB DDR2 800
ASUS EN9600GT Driver Version. 6.14.11.7116
Seagate 32GB SATA
ASUS DVD-RX 20X
LG 22" L226W

Ok so, my monitor was connected using normal VGA cable before & I could see resolutions like 1280 X 768
1280 X 720 etc.
I just connected using DVI cable & resolution automatically changed from 1280 X 768 to 1680 X 1050 which is the native resolution of the monitor.
At this resolution things become so small that you can not read anything comfortably.
Now, my pc is not showing any 16:10 or 16:9 resolutions other than the native resolution.
I prefer to have 1280 X 768 or 1280 X720. Things are readable at this resolution & clarity is not compromised either.
When I go to NVIDIA control to Manage custom resolutions, it will always fail the test & without testing you can not apply the resolution.

Answer : Problem: Custome Resolution for lcd

I found the solution. You need to change Auto to GTF inadvanced settings &then any resolution works.